Annual Output Of 300,000 Tons Of Fuel Ethanol Project Maize/Corn
Crushing/Milling Section Ethanol Production Equipment
corn hammer mill, maize milling system,Corn milling system,Corn
1) Frequency Conversion Impeller Feeder: To make the corn grinder
work full efficiently, the frequency is changing in real time based
on the raw material amount in the crushing chamber, and the feeding
speed is self-adapting.
2) Crushing Chamber: there area number of hammer and shaft inside.
the high speed rotating hammer make the raw material corn grain
into powder. and there are screen at the bottom of the chamber.
3) Main Motor: we equip the super quality and Wannan brand motor,
or the motor brand can be designated by the user for our hammer
4) Base structure: support the other unit.
5) Bearing: we adopt the famous brand bearing in our machine.
We adopt the super quality Wannan brand motor, or the motor brand
can be designated by the user for our hammer mill machine in our
Brief introduction of process(corn crushing process)
The feedstock corn is discharged from the bottom of the silo
through an electric valve, conveyed to the crushing workshop by
conveyor, and conveyed to the bucket scale by bucket elevator, then
to remove impurities in the corn by sieve and stone removal
After cleaning, the corn goes into the buffer bin, and then through
the iron removal variable frequency feeder to feed into the crusher
The corn is hit by hammer at a high speed, and qualified powder
material enters into the negative pressure bin.
The dust in the system is inhaled to the bag filter through a fan.
The recovered dust returns to the negative pressure bin, and the
clean air is discharged to the outdoor.
In addition, the negative pressure bin is equipped with a material
level detection alarm, the fan is equipped with a silencer.
The whole system operates under the micro negative pressure, with
low power consumption and no dust spillover in the working
environment. The crushed powder is conveyed to the mixing system by
the screw conveyor at the bottom of the negative pressure bin.
The mixing system is controlled by computer and the ratio of powder
material and water is controlled automatically.
Packaging And Transportation
1) small parts use wooden box, large equipment use plastic film.
2) Sea shipping.
3) Shanghai port.
1). Our company can provide a sophisticated product after-sale
service and can ensure the implementation, maintenance and
commission of projects.
2). We can reach the project site after receiving the user’s
Any question, feel free to contact us !