Energy-Efficient Solid And Liquid Decanter Centrifuge For
Separating Stillage / Distiller'S Grains/ Spent Wash
Energy-Efficient Centrifuge For Separating Stillage
Energy Saving Solid Liquid separation Centrifuge for Distiller'S Grains
Solid liquid separation horizontal screw centrifuge, separation of spent wash
Decanter Centrifuge Product Description
The decanter centrifuge, the continuous feeding, separating and
discharging can be realized as it rotates at its full speed. It is
characterized by compact structure, easy obturation, smooth
running, low noises, large handling capacity, low energy
consumption, high automation, small working strength, simple
operation and easy maintenance, and wide applications.
It is wide application range, work continuously, large processing
capacity, low cost, convenient maintenance and so on. It is the
best equipment for separating solid-liquid.
LW serial decanter centrifuge has the following characters:
1. Good adaptation. This machine is designed to take full
consideration of various special requirements to the centrifuge for
the chemical waste liquid, optimization design for the main
features with specificity and adjustability, etc. As long as the
user states its installation and working site, material
physicochemical property and technological requirements for the
centrifuge before ordering, we will suggest and provide users with
2. High automation degree. The machine’s feeding, separation,
discharge and other processes are for automatically continuous
operation at full speed which could be communicated with the
microcomputer directly, to realize process automation control.
3. Good operation environment. This machine is for the separation
of materials under conditions of complete closure, the operator
on-site is without any pollution, to maintain the production
environment neat and clean.
4. Strong corrosion resistance. The machine's drum, spiral, main
case and other parts in contact with the materials utilize the high
quality stainless steel, with high acid-resistant and
alkali-resistant capabilities. Also other materials could be used
as per users’ requirements.
5. Good wear properties. According to users’ requirements, the
spiral vane of this machine adopts the advanced wear-resisting
technology such as surfacing hard alloy or inset hard alloy plates,
improving the service life of the helix greatly.
6. Good process response. Using frequency conversion technology,
the smooth start of the main engine is realized, stepless
adjustment of speed and dynamic intelligent control, which can be
adapted to the process fluctuation automatically. If there is a
need for the user, it also can realize the constant torque control.
7. Good running stability. This machine adopts the involute
planetary gear differential, a unique low oil running technique of
our factory. Low operating temperature, big transmission torque and
reliable performance. Main bearing of the drum adopts oil
circulation lubrication, which can effectively improve its running
speed and adapt to the high temperature working condition.
8. The main motor could be configured with ordinary type, speed
variable type or explosion-proof type, users could choose their own
9. Low energy consumption. The machine adopts advanced frequency
conversion govern technology, minimize the impact on the grid, and
its energy consumption is just 1/3 to 1/2 of the same kind product.
10. Smooth running. With the parts precision dynamic balancing and
the whole machine’s working dynamic balancing, the standard of the
vibration intensity of horizontal decanter centrifuge defined by
the factory is just 5 mm/s below, which is far below the regulation
7.1 mm/s of JB/T 502-2004 " Technology conditions of spiral
decanter centrifuge ".
11. Low noise. The noise sound pressure level is below than 85 db
(A), which is below than the regulation 90dB(A) of JB/T 502-2004 "
Technology conditions of decanter centrifuge ".
12. Complete and reliable safety device. The machine is equipped
with multiple protections such as torque protection, power control,
electric interlocking, sound and light alarm, which can effectively
remove or reduce the damage caused by sudden failures.
Environmental Protection Industry
Various sludge thickening and dehydration for municipal
administration waste water treatment plant;
Various sludge thickening and dehydration for industry waste water
Foodstuff Fermentation Industry
Spent wash dehydration in ethanol plant;
Dregs and juice separating in breweries and wineries.
Solid-Lliquid separation of rare earth industry;
Dehydration of oil drilling mud;
Dehydration of resin.
1. Main standard of the national machinery industry.
JB/T502-2004 "spiral discharge sedimentation centrifuge"
JB/T9095-1995 "centrifuge, separator forgings, welding conventional
NDT technology standard"
2. The national main standard
GB10894-89 "separation machinery noise sound power level
measurement engineering method"
Decanter Centrifuge Main specifications and technical parameters
|Code||Type||Main technical parameters||Motor power||Outline dimension||Weight of main unit|
|Drum Dia||Length||Max. speed||Biggest|
|Capacity||Main motor||Auxiliary motor|
There is wear-resisting tungsten carbide, cemented carbide block or
ceramic plate for protecting the damageable parts of decanter
centrifuge such as helical blades, inlet and outlet mouths.
Precise balance, to ensure smooth operation
Wulong Quality Famouse Band And New Speciality
Packaging & Shipping
1) small parts use wooden box, large equipment use plastic film.
2) Columns are fastened with iron support.
3) Trade term: FOB or CIF.
4) Sea shipping.
5) Port: shanghai port
Jiangsu Wulong Machinery Co., Ltd. is a manufacturer of Decanter Centrifuge/ Horizontal Screw Centrifuge in China. our products has been exported to more than 10 countries
in Europe, Africa and Southeast Asia, and are well received by
1. 12 months guarantee period from machine arrive date.
2. Abundant spare parts in stock are available to provide.
3. Our technicians could be dispatched for overseas service.
4. 8* 24 hours technical consultation.
5. Your workers could get trained both in our factory and yours.
6. Routine tracing till the machine work properly will be done
7. We will remind you to do the normal maintenance.
8. Your suggestions or any comments & reflection would be
treated in priority.
About Delivery time
Usually we send tne shipments in FOB term.However, the terms of CIF
are acceptable which depend on the preference of clients.
About Lead Time
Usually it takes about 25-40 days after we receive your down
payment and drawing confirmation.
About Payment Term
By T/T in Advance, or Irrevocable L/C as Sight.
Our machines can be customized, leave an inquiry to know more
details about price, packing and shipping.
* Earliest delivery ,high quality with best price
* Safe and efficient transport services
* 24 hours technical support by E-mail or telephone.